Closing Up The Lab

Key Points:

• Remove the pins from the ramp and place them in the white board marker tray.
• Place the ramp on the floor in front of the interior glass doors.
• Lock the interior glass door (double check door is locked).
• The exterior doors have a locking mechanism on the bottom and a key lock by the door handle (always double check that the key locks are locked).
• Make sure all exterior doors are locked (keys turn at 90 degrees).
• Ensure that the generator (located in generator closet) is turned off by switching main red switch to OFF.
• Generator closet door locks to the right (different from other doors).
• If you can, place cones around lab hitch and around the lab (if possible).
• After completing this checklist, the lab is ready to be picked up!